Please Note: You are viewing the unstyled version of ATC, Inc. Either your browser does not support CSS (Cascading Style Sheets) or it is disabled. As a result, much of this website will not look the way it was intended, although all of its contents will be accessible to you. For more information, visit our Browser Support page.

Skip to Primary Site Navigation, Secondary Site Navigation, Content, Company Address

Model IPE2

Model IPE2

Instrument Applications:

  • 1 or 2 of the following tests:
    • Pressure Leak Test from 0.02 cc/min to 500 psig
    • Constriction or Blockage Flow Test, up to 5% part diameter constriction
  • 1 or 2 Independent Test Channels
  • Testing up to two sets of parts independently
  • Sort function - testing multiple parts and sorting the rejects. Applicable as the IGLS measurement is not volume sensitive!
  • Large volume parts, complex parts and short cycle time
  • cleanroom or industrial application
  • User friendly Operator Interface for stand alone applications
Leak Test Simulator button

Leak Test Simulator: Use our Leak Test Simulator to optimize your application and define your micro-flow sensor/instrument.

Available Options: Please see ATC's options chart.

Features:

  • Micro-Flow Sensor - The Intelligent Gas Leak Sensor (IGLS)
  • Single or Dual test channels with one or two of the following:
    • Leak Test Channel Pressure Testing: Automated test with large volume Quick-Fill features.
    • Constriction / Blockage Flow Channel: with Intelligent Gas Flow Sensor (IGFS) and unique pressure control.
  • Optional Sort Test Controller: Leak Test multiple parts, and sorting out the rejected parts
  • For Each Test Channel:
    • Built in Equivalent Diameter (ED) and valve
    • Character Display Interface
    • Digital and analog I/O Interface
    • Ethernet or serial Interface for each test channel
  • Ethernet connection
  • Stainless steel enclosure for cleanroom

Applicable Micro-Flow Sensors (IGLS):

Specifications

Dimensions & Access:

  • 24”W, 23”H, 12”D (Does not include connectors & fittings)
  • Expansion tank and pressure regulators are externally mounted

Gases:

IPE2 Specifications

Click to Enlarge

  1. RJ45 Ethernet or RS232 Serial Interface
  2. Digital Inputs: 5 VDC, NPN Opto-Isolated for start, stop, type, pressure
    switch, verify. Digital Outputs: 30 VDC-20 mA, NPN, opto-isolated for
    pass, fail, clamp, test type, exhaust and custom
    Analog outputs: single channel, 0-5 VDC pressure control
  3. Pneumatic connections: Test Ports
    Air supply: ¼” to ½” Swagelok
    (Application Dependent)
  4. Power Supply:
    115VAC-60Hz
    220VAC-50Hz (optional)

Print Model IPE2 - PDF (494K)


Top of Page